濟南誠耐金屬制品有限公司

濟南誠耐金屬制品有限公司

不斷發展技術力量、完善的設計服務團隊,真誠為您提供的服務

咨詢熱線
于經理15194166167
15990909037

聯系我們

企業名稱:濟南誠耐金屬制品有限公司

聯系人:于經理

電話: 15990909037

電話: 15194166167

地址:山東省濟南市歷城區小清河南路8288號

當前位置:首頁 »資訊中心 » 新聞資訊不銹鋼門套安裝節點及方式

不銹鋼門套安裝節點及方式

來源:http://duobimai.com/ 瀏覽:0發表時間:2023-06-10
一直接對接門套做法
Method of directly connecting door jambs
常規注意事項:
General precautions:
材料厚度必須保證1.2厚(實際厚度不得小于1.08)。
The material thickness must ensure a thickness of 1.2 (the actual thickness should not be less than 1.08).
必須注意用豎料來收口門頭橫料。
It is necessary to pay attention to using vertical materials to close the horizontal material of the door head.
注意制作基層一定要小于門套包邊尺寸5mm左右,保證足夠的空間安裝和打膠。
Be sure to make the base layer smaller than the door pocket edge size by about 5mm to ensure sufficient space for installation and gluing.
門口板寬度要略小于豎料寬度1—2mm,收口才美觀。
The width of the entrance board should be slightly smaller than the width of the vertical material by 1-2mm for a beautiful closure.
一般門頭板和立面包板對接處的陰角處不建議用膠水收口,這樣既美觀又能檢測門套安裝質量。
菏澤拉絲不銹鋼電梯門套線
It is not recommended to use glue to close the internal corners of the joint between the door header and the facade panel, as this not only looks beautiful but also checks the installation quality of the door cover.
二普通45°拼接門套做法
Method of making two ordinary 45 ° splicing door jambs
常規注意事項:
General precautions:
材料厚度建議1.2厚(實際厚度不得小于1.08)。注意對角處不能有錯位,焊點處一定要處理在隱蔽位置。
The recommended material thickness is 1.2 (the actual thickness should not be less than 1.08). Note that there should be no misalignment at the corners, and the welding points must be handled in a concealed position.
注意制作基層一定要小于門套包邊尺寸5mm左右,保證足夠的空間安裝和打膠。
Be sure to make the base layer smaller than the door pocket edge size by about 5mm to ensure sufficient space for installation and gluing.
一般門頭板和立面包板對接處的陰角處不建議用膠水收口,這樣既美觀又能檢驗門套質量。
It is not recommended to use glue to close the internal corners of the joint between the door header and the facade panel, as this not only looks beautiful but also checks the quality of the door cover.
本文由菏澤拉絲不銹鋼電梯門套線友情奉獻.更多有關的知識請點擊:http://duobimai.com真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article is dedicated by Heze Brushed Stainless Steel Elevator Door Cover Line. For more information, please click on: http://duobimai.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned